Advanced Search
# Product Code Quantity
1
2
3
Boiler and Cooling Towers
Centrifugal and Drum Transfer Pumps
Chemical Feed - Metering Pumps
Chlorine DO Turbidity
Conductivity and Resistivity
Flow Meters
Level Controls
pH and ORP
Multi-Parameter Control
Temperature and Pressure
Tanks and Containment
Valves and Actuators
Hand-held Water Quality Meters

Pumps, Instrumentation & Controls for Water Treatment






Batch Mode

Item # Qty Valid
 
 
 
Expand
Blue-White | Flowline | MyronL | Seametrics | Sensorex

Blue-White Instructional Videos

  • FLEXFLO® A-100NV Peristaltic Pump - Programming Tube Failure Detection

  • FLEXFLO® A-100NV Peristaltic Pump - Programming Manual Operation - Mode 1

  • Flex-Pro Firmware Upgrade comparison

  • Roller Assembly Maintenance - Flex-Pro Peristaltic Metering Pump by Blue-White

  • Flex-A-Prene for ProSeries Flex-Pro Peristaltic Pumps

  • Flex-Pro® A3 Patented Tube Failure Detection - Testing and Setup

  • Flex Pro A3V Peristaltic Pump Maintenance from Blue White Industries

    Describes maintenance for the Flex Pro A3V Peristaltic Pump.

  • Flex Pro A3V Peristaltic Pump Installation from Blue White Industries

    Shows how to install the Flex Pro A3V Peristaltic Pump.

  • Operating the FlexFlo A-100NV Peristaltic Pump

    Describes the operation of the FlexFlo A-100NV Peristaltic Pump.

Flowline Instructional Videos

  • Flowline Pulse Radar Level Sensors for Difficult Applications

  • Which Echopod level sensor is best for my application?

    Describes the differences between each EchoPod level sensor model, detailing their functions to assist in selecting the right sensor for your application.

  • How do I best apply my pressure level sensor?

    Describes how pressure level sensors work, how they are best applied, what to avoid and how to maintain them.

  • How do I properly install my ultrasonic level sensor?

    Describes proper fitting selection and basic mounting guidelines to maximize the installed performance of your ultrasonic level sensor.

  • How do I properly install my ultrasonic level sensor in a standpipe?

    Describes how to properly install your ultrasonic level sensor in a stand pipe to improve sensor performance with foam, turbulence and vapor.

MyronL - Ultrameter III 9P Titrations Instructional Videos

  • Part 1: Introduction - Purpose and Scope of Instructional Videos

    This is Part 1 in a series of instructional videos that demonstrate how to use the new Ultrameter III 9P Titration Kit to get fast, accurate alkalinity, hardness, and LSI readings using the 9P's innovative conductometric titration functions.

  • Part 2: Installing the Cell Extender

    This is Part 2 in a series of instructional videos that demonstrate how to use the new Ultrameter III 9P Titration Kit to get fast, accurate alkalinity, hardness, and LSI readings using the 9P's innovative conductometric titration functions. Part 2 demonstrates how to install the cell extender included with the 9PTK prior to performing titrations.

  • Part 3: How to Plunge

    This is Part 3 in a series of instructional videos that demonstrate how to use the new Ultrameter III 9P Titration Kit to get fast, accurate alkalinity, hardness, and LSI readings using the 9P's innovative conductometric titration functions. Part 3 demonstrates how to use the T-Plunger included with the 9PTK during titrations.

  • Part 4: Becoming Familiar with Pipette Positions

    This is Part 4 in a series of instructional videos that demonstrate how to use the new Ultrameter III 9P Titration Kit to get fast, accurate alkalinity, hardness, and LSI readings using the 9P's innovative conductometric titration functions. Part 4 demonstrates how to draw and dispense reagents using the fixed volume micropipette included with the 9PTK prior to performing titrations.

  • Part 5: Learn How to Perform an Alkalinity Titration

    This is Part 5 in a series of instructional videos that demonstrate how to use the new Ultrameter III 9P Titration Kit to get fast, accurate alkalinity, hardness, and LSI readings using the 9P's innovative conductometric titration functions. Part 5 demonstrates how to perform an alkalinity titration using the 9PTK.

  • Part 6: Learn How to Perform a Hardness Titration

    This is Part 6 in a series of instructional videos that demonstrate how to use the new Ultrameter III 9P Titration Kit to get fast, accurate alkalinity, hardness, and LSI readings using the 9P's innovative conductometric titration functions. Part 6 demonstrates how to perform a hardness titration using the 9PTK.

  • Part 7: Learn How to Perform an LSI Titration Using the LSI Calculator

    This is Part 7 in a series of instructional videos that demonstrate how to use the new Ultrameter III 9P Titration Kit to get fast, accurate alkalinity, hardness, and LSI readings using the 9P's innovative conductometric titration functions. Part 7 demonstrates how to perform an LSI titration using the 9PTK.

  • Part 8: Closing - Points to Remember

    This is Part 8 in a series of instructional videos that demonstrate how to use the new Ultrameter III 9P Titration Kit to get fast, accurate alkalinity, hardness, and LSI readings using the 9P's innovative conductometric titration functions. Part 8 stresses key steps for 9P titrations that ensure your success.

Seametrics Instructional Videos

  • Seametrics WMP-series Magmeter

    The WMP-Series is a full-bore, plastic-bodied electromagnetic flow meter designed for flow and usage monitoring applications in 1, 2 and 3 inch pipe.

  • Changing Pulse Output Rates on Seametrics MJ-series Water Meters

    This is a step by step demonstration of how to change the pulse rates on the Seametrics MJ-Series Pulse Meter in the field.

  • Seametrics - Introducing the iMAG-series Magmeters

    This extremely durable and economical magmeter is available for 3 to 12 inch pipe to meet a variety of application needs. The optional remote indicator allows for versatility and flexibility, and onboard 4-20 is just one of several available outputs for the iMAG Series.

Sensorex Instructional Videos

  • ORP Electrode Calibration

    Brief guide on how to calibrate your ORP electrode and ORP meter.

  • pH Electrode Calibration

    Short instructional video on how to calibrate your pH electrode with you pH meter.

  • Conductivity Sensor Calibration

    Easy to follow instructions on how to calibrate your conductivity sensor and conductivity meter.

  • S8000 pH/ORP System Introduction

    Quick synopsis of Sensorex's new S8000 Modular pH/ORP system, including how to select the right components for your installation.

  • S8000 System Component Selection

    Detailed look at how to select the right S8000 components for your application.

  • S8000 Electronic Module Selection

    Detailed look at how to use the optical electronic modules for the S8000 pH and ORP system.

  • Smart Aqua Meter SAM-1 Introduction

    Overview of new Sensorex SAM-1 Smart Aqua Meter